Administration > Management; Management; Administration > Factory Defaults; Factory Defaults - Cisco Linksys WUMC710 User Manual

Linksys WUMC710
Administration > Management
Use this screen to manage specific media connector functions: access to the
browser-based utility, backup of the configuration file, and reboot

Management

Device Access
Use a password to protect access to the browser-based utility
Device Password
Enter a new Password for the media connector
Re-enter to confirm
Enter the Password again to confirm
Idle Timeout The login times out after a period of inactivity that you specify
The range is 60 to 3600 seconds The default is 600
Web Access
Access via Wireless
If you are using the media connector in a public domain
where you are giving wireless access to your guests, you can disable wireless
access to the media connector's browser-based utility You will only be able
to access the browser-based utility via a wired connection if you disable the
setting Keep the default, Enabled, to allow wireless access to the media
connector's browser-based utility, or select Disabled to block wireless access
to the utility
Backup and Restore
Backup To back up the media connector's configuration file, click Backup
Configurations Then follow the on-screen instructions
Restore Click Browse and select the configuration file Then click Restore
Configurations
System Reboot
Reboot To reboot or restart the media connector, click Start to Reboot
Click Save Settings to apply your changes, or click Cancel Changes to cancel
your changes
Administration > Factory Defaults
Use this screen to restore the media connector's configuration to its factory
default settings

Factory Defaults

Restore Factory Defaults To reset the media connector's settings to the
factory defaults, click Restore Factory Defaults Any settings you have saved
will be lost when the default settings are restored
Advanced Configuration
12