Behringer Eurolive VS1220 User Manual page 6

6
5.2 Full-range stereo operation with
floor monitors
This example is a variation of the example above, with the
addition of several VS1220F floor monitors. Two separate
monitor outputs from the mixing console are connected to the
inputs of a stereo power amplifier. A VS1220F is connected to
each amplifier output, and a second VS1220F is connected to the
parallel outputs of the first set of VS1220F monitors.
XENYX 2442FX
L R
EUROPOWER EP2000
EUROLIVE VS1220
Fig. 5.2 Full-range stereo operation with floor monitors
AUX 1 AUX 2
SEND SEND
EUROPOWER EP2000
EUROLIVE VS1220F
EUROLIVE VS1220/VS1220F/VS1520 User Manual
5.3 Two-way stereo operation with a
crossover, full-range loudspeakers and
subwoofers
Using an external active crossover, the main output signal of a
mixing console is split into two signals. One signal covers the
lower frequency range and the other signal covers the mid and
high frequency range. The recommended crossover frequency is
150 Hz. Then, the mid-high frequency signal is connected to a
stereo power amplifier. A VS series loudspeaker is connected to
each of the amplifier outputs. The low-frequency signal is
connected to an additional power amplifier, which powers two
subwoofers.
XENYX 1202FX
SUPER-X PRO CX2310
EUROPOWER EP2000
EUROLIVE VS1220
Fig. 5.3 Two-way stereo operation with subwoofers
EUROLIVE VP1800S