Documentation Anomalies - HP StorageWorks 2/32 - SAN Switch Release Note

Documentation Anomalies

Recommended Steps
Use these steps to determine if there is a hardware problem.
1. Determine which component is indicated. The message provides the
2. Check the LEDs on the related hardware component.
3. Enter the switchstatusshow, chassisshow, and sensorshow
4. Take the appropriate action. If one of the components appears to be faulted,
Note:
then it was a transient I2C bus fault, and no action is required.
Documentation Anomalies
Feature/Option Configuration Callouts in Readme.txt
The readme.txt file included on your software CD does not correctly identify
available SAN Switch 2/32 feature/option configurations. Refer to
Summary,
62
information as follows:
<fru_type> <unit> I2C timed out: state <curr_state>
commands.
try reseating the component. If it still appears to be faulty, replace the
component.
If the LEDs and command printouts indicate that all components are healthy,
page 6, of these Release Notes for current information.
SAN switch 2/32 Version 4.0.2b Release Notes
Features