Configuring For Snmp; Configuring For Snmpv1 - HP StorageWorks 2/16 - SAN Switch Manual

Configuring for SNMPv1

Use the following procedures to configure the SNMPv1 agent and traps. To display SNMP
agent configuration information:
Issue the agtCfgShow command, as in the following example:
switch:admin> agtcfgshow
Current SNMP Agent Configuration
Fabric OS 3.x Document Addendum
Customizable MIB-II system variables:
sysDescr = FC Switch
sysLocation = End User Premise
sysContact = Field Support.
authTraps = 1 (ON)
SNMPv1 community and trap recipient configuration:
Community 1: Secret C0de (rw)
Trap recipient: 192.168.1.51
Trap recipient Severity level: 4
Community 2: OrigEquipMfr (rw)
Trap recipient: 192.168.1.26
Trap recipient Severity level: 0
Community 3: private (rw)
No trap recipient configured yet
Community 4: public (ro)
No trap recipient configured yet
Community 5: common (ro)
No trap recipient configured yet
Community 6: FibreChannel (ro)
No trap recipient configured yet
SNMP access list configuration:
Entry 0: Access host subnet area 192.168.64.0 (rw)]
Entry 1: No access host configured yet
Entry 2: No access host configured yet
Entry 3: No access host configured yet
Entry 4: No access host configured yet
Entry 5: No access host configured yet
Fabric OS procedures user guide
145