Vertical Curve - Sanyo PLC-XF60 Owner's Manual

Instruction manual, plc-xf60 advanced screen manager

Hide thumbs Also See for PLC-XF60:

Table of Contents

STEP-2 Image Editing

■ Vertical curve

This editing is to project on the vertically curved screen.

Select "Vertical curvet" from either "Type(T)" in the menu or the toolbar.

The grid screen for Vertical curve appears.

Edit the same way as spherical correction. See ■ Spherical correction for basic opera-

tion.

Drag D and E points with a mouse to adjust the roundness of cylinder.

When the distance between horizontal lines are not equal, change the view angle fig-

ure from 10 to 60 (1000 - 6000) in the "View angle setting" menu. When the distance

at center is large and at both edges are small, set the large figure.

CAUTION: AFTER EDITING ANY OF A, C, F, H POINTS, THE PREVIOUS EDIT FOR

THE SPHERICAL ROUNDNESS TO EACH OF D, E POINT WILL BE RESET. WHEN

EDITING SPHERICAL ROUNDNESS,YOU NEED TO EDIT A, C, F, H POINTS FIRST.

When you want to edit more details by gird unit, Select "Grid [transition]i" in the

menu, and edit by grid unit after basic editing. Refer to ■ Grid [transition].

Table of Contents