HP SN6000B Release Note page 19

•
SLP log—Management_Application\cimom \cfg\slp.log
• SLP daemon—Management_Application\cimom\cfg\slp.conf (the SLP daemon can be
reconfigure the by modifying this file).
•
SLP register—Management_Application\cimom\cfg\slp.reg
Statically register an application that does not dynamically register with SLP using SLPAPIs by
modifying this file. For more information about these files, read the comments contained in them,
or see http://www.openslp.org/doc/html/UsersGuide/index.html.
Verifying SLP service installation and operation on Windows systems:
1. Launch the Server Management Console from the Start menu
2. Click Start to start the SLP service.
3. Open a command window.
4. Enter cd c:\Management_Application\cimom \bin and press Enter to change to the directory
where slpd.bat is located.
5. Enter > slptool findsrvs service:service-agent and press Enter to verify the SLP service is running
as a Service Agent.
6. Enter > slptool findsrvs service:wbem and press Enter to verify the SLP service is advertising its
WBEM services.
7. Select one of the following options to verify the SLP service is advertising the WBEM SLP template
over its configured client protocol adapters.
• Enter > slptool findattrs service:wbem:http://IP_Address:Port and press Enter.
• Enter > slptool findattrs service:wbem:https://IP_Address:Port and press Enter.
NOTE:
IP_Address:Port is the IP address and port number that display when you use the
slptool findsrvs service:wbem command.
Enumeration issue with HP StorageWorks 2408 FCoE Converged Network Switch running
on Fabric OS 6.3.x or lower
When Network Advisor manages an HP StorageWorks 2408 FCoE Converged Network Switch
running Fabric OS 6.3.x or earlier, connected to an FDMI enabled CNA, enumeration instance fails
for the following classes:
• Brocade_EthernetPortLANEndPoint
• Brocade_EthernetAdminDomainHostedLanEndPoint
• Brocade_EndpointOfNetworkPipe Brocade_LANEndpoint
• Brocade_EthernetSwitchHostedLANEndPoint
• Brocade_InEthernetLogicalNetwork
• Brocade_PlatformHostedLANEndPoint
Instance class key property with special character
Getinstance operation fails if the key property value contains either a semicolon or a non-printable
character.
HP Network Advisor B-series Enterprise, Professional Plus, and Professional 11.1.1 Release
Notes 19