HP SN6000B Release Note page 12

Secure Fabric OS fabrics cannot be discovered from Network Advisor
Network Advisor does not support Secure Fabric OS (SFOS). If you try to discover the fabric, Network
Advisor displays the error message Discovery Failed. You must remove the secure Fabric OS
settings and change back to a normal fabric before discovering it from Network Advisor.
Display of Logical switches
If you create logical switches through the Logical Switch dialog box, the logical switch displays under
undiscovered Logical Switch in the existing Logical Switches Panel. You must rediscover the newly
created logical switch fabric.
Destination columns are blank for HP StorageWorks Encryption SAN Switch in top talkers
dialog
When the Top Talkers dialog box is launched for the HP StorageWorks Encryption SAN Switch, the
columns Destination, Destination port, and Destination switch port are sometimes empty.
Firmware download through SCP Server
If you use the Windows-based SCP Server, firmware download fails for the switches. HP recommends
that you use the Linux-based SCP Server.
DCFM to Network Advisor remote migration is not supported
Remote migration is not supported by Network Advisor. HP recommends that you first migrate from
DCFM 10.3.x / 10.4.x to another DCFM 10.3.x / 10.4.x server, and then migrate to Network
Advisor.
Privilege names
Privilege names are displayed in the Role Management dialog with SAN – prefixes. After migration
from an older version, new privilege names are displayed in the role Management dialog with these
prefixes.
Wrapper log files
The rollover of wrapper log files may cause the server running on Linux to crash. If this issue is
encountered, the user is required to terminate the dcmsvc process from the task manager and restart
the server from the Server Console.
Manually assigning hosts to users
If a custom AOR (Area of Responsibility) without any hosts included is manually assigned to a defined
user, and all hosts are displayed in the topology to that user. However, deleting or updating hosts is
not reflected in the topology for that user until the Client is restarted.
Moving DCB products form one fabric to another
If DCB products move from one fabric managed by Network Advisor to another managed fabric, the
VLAN Management dialog is not populated with the configuration for those products.
12