Support And Os Conditions; Support Matrix For Vse Os, Vse Parameter And Record Format - HP StorageWorks P9000 User Manual

NOTE:
There is no guarantee that Data Exchange will correctly access your data without meeting these
requirements.
Table 28 Support and OS Conditions
OS Version
VSE2.5 and later
When you use MTO and OTM for the dataset allocated by VSE 2.3, you must specify the RF , RL and
BL by using the correct VSE parameters.
When you use MTO and OTM for the dataset allocated by VSE 2.5, Data Exchange can transfer
data without a VSE parameter.
Table 29 Support Matrix for VSE OS, VSE Parameter and Record Format
OS and Data VSE Parameter
Exchange Ver-
sion
VSE 2.3 and Yes
earlier
(Data Exchange
01-xx-58 and No
earlier)
VSE 2.5 and
Yes
later
(Data Exchange
01-03-59 and
No
later)
1
Legend:
F: Fixed non-block length
FB: Fixed block length
V: Variable non-block length
VB: Variable block length
2
It is possible to transfer data between correct dataset attribute (5
valid only if the VSE parameters are as shown:
RL 32756
BL 32760
BL=RL+4
For the following dataset attributes, the data transfer is invalid if user does not specify the VSE
parameter value as shown above.
RL>32756
Storage System
XP24000/XP20000 or XP12000/XP10000 disk array
F
Available
Not available
Available
Available
HP StorageWorks P9000 Data Exchange User Guide
1
Record Format
FB
Available Available
Not available Not available
Available
Available
Available
Available
RL BL 4). The data transfer is
Data Exchange Ver-
sion
01–03–59 and later
V VB
Available
Not available
2 3
Available
4 5
Available
51