Oki proColor pro910 Series User Manual page 32

2. Fold out the paper support section and swivel out the
extension supports (2).
3
3. Adjust the paper guides (3) to the size of the paper being
used.
4.
Fan the paper to be loaded then tap the edges of the stack on
a flat surface to make it flush.
5. Load the paper.
• For single-sided printing on letterhead, load the paper into
the multi-purpose tray with pre-printed side up and top
edge into the printer.
• For two-sided (duplex) printing on letterhead, load the
paper with pre-printed side down and top edge away from
pro910 User's Guide> 32
2