Table of Contents
Advertisement
5.
Press the Enter button to select this Item.
6.
Press the Up-arrow or Down-arrow buttons repeatedly
until Tray1 Config is highlighted.
7.
Press the Enter button to select this Item.
8.
Press the Up-arrow or Down-arrow buttons repeatedly
until MediaType is highlighted.
9.
Press the Enter button to select this Item.
10.
Press the Up-arrow or Down-arrow buttons repeatedly to
move through the range of media types until Transparency is
highlighted.
11.
Press the Enter button to select this value.
12.
Check that an asterisk (*) appears beside Transparency.
13.
Press the Online button to exit menu mode and return to the
ready to print status.
M
2 – MP T
ENUS EXAMPLE
To set paper size in the MP Tray:
1.
Ensure that the display panel indicates that the printer is
ready to print.
2.
Enter menu mode by pressing either the Up-arrow or
Down-arrow button and press them repeatedly until the
Menus menu is highlighted.
3.
Press the Enter button to select this menu.
4.
Press the Up-arrow or Down-arrow buttons repeatedly
until Tray Configuration is highlighted.
5.
Press the Enter button to select this Item.
6.
Press the Up-arrow or Down-arrow buttons repeatedly
until MP Tray Config is highlighted.
7.
Press the Enter button to select this Item.
8.
Press the Up-arrow or Down-arrow buttons repeatedly
until Paper Size is highlighted.
9.
Press the Enter button to select this Item.
RAY PAPER SIZE
pro910 User's Guide> 122
Advertisement
Table of Contents
