ASROCK Z77 Extreme11 User Manual page 68

Use this to configure the maximum instantaneous current allowed
for the primary plane. The default value is [Auto].
Secondary Plane Current Limit
Use this to configure the maximum instantaneous current allowed
for the secondary plane. The default value is [Auto].
GT OverClocking Support
Use this to enable or disable GT OverClocking Support. The default
value is [Disabled].
DRAM Timing Configuration
Load XMP Setting
Use this to load XMP settings. Configuration options: [Auto], [De-
fault], [Profile 1] and [Profile 2]. The default value is [Auto].
DRAM Frequency
If [Auto] is selected, the motherboard will detect the memory
module(s) inserted and assign the appropriate frequency automati-
cally.
DRAM Configuration
DRAM tCL
Use this to change CAS# Latency (tCL) Auto/Manual settings. The
default is [Auto].
DRAM tRCD
Use this to change RAS# to CAS# Delay (tRCD) Auto/Manual set-
tings. The default is [Auto].
68