Connecting The Ductwork; Air Deflector Installation (Recirculating Accessories) - Electrolux RH30WC60GS Installation, Use & Care Manual
30” and 36” free-standing range hood
Hide thumbs
Also See for RH30WC60GS:
- Guia de instalación, uso y cuidado (22 pages) ,
- Installation, use & care manual (22 pages) ,
- Manual d’installation, utilisation et d’entretien (22 pages)
Table of Contents
Advertisement
Installing the hood
12
Connecting the ductwork
•
Install ductwork, making connections in the
direction of airflow as illustrated.
•
Push duct over the exhaust outlet.
•
Wrap all duct joints and the flange connections
with duct tape for an airtight seal.
•
Make the same connection in the wall or ceiling
vent exit.
Duct tape
over seam
Ductwork
Airflow
Airflow
Duct tape
over seam
hood
Air deflector installation
(Recirculating accessories)
•
Assemble the air deflector with the duct cover
bracket with 4 assembly screws provided as
shown.
•
Measure from the bottom of the air deflector to
the bottom of the hood outlet, as shown.
•
Cut the duct at the measured size.
•
Uninstall the air deflector removing the 4
assembly screws.
•
Slip the duct onto the bottom of the deflector.
•
Place the assembled deflector and duct over the
exhaust outlet from the hood.
•
Assemble the air deflector to the duct cover
bracket with 4 assembly screws provided as
shown.
Advertisement
Table of Contents
