Tidying Cables; Mounting On A Wall - LG 24LN4510 Owner's Manual

Tidying cables

Gather and bind the cables with the supplied
cable holder.
CAUTION
Do not move the TV by holding the cable holder,
as the cable holders may break, and injuries and
damage to the TV may occur.

Mounting on a wall

An optional wall mount can be used with your LG TV.
Consult with your local dealer for a wall mount that
supports the VESA standard used by your TV model
(listed below).
We recommend that you use an LG brand wall mount
when mounting the TV to a wall.
10 cm
Make sure to use screws and wall mounts that meet the
VESA standard. Standard dimensions for the wall mount
kits are described in the following table.
Cable holder
10 cm
10 cm
10 cm
ASSEMBLING AND PREPARING
VESA (A x B) 100 x 100
Standard screw M4
Number of screws 4
Wall mount bracket RW120
(optional)
CAUTION
Disconnect the power cord first, and then
move or install the TV. Otherwise electric
shock may occur.
If you install the TV on a ceiling or slanted
wall, it may fall and result in severe injury.
Use an authorized LG wall mount and
contact the local dealer or qualified
personnel.
Do not over tighten the screws as this may
cause damage to the TV and void your
warranty.
Use the screws and wall mounts that meet
the VESA standard. Any damages or injuries
by misuse or using an improper accessory
are not covered by the warranty.
NOTE
Use the screws that are listed on the VESA
standard screw specifications.
The wall mount kit includes an installation
manual and necessary parts.
The wall mount bracket is optional. You can
obtain additional accessories from your local
dealer.
The length of screws may differ depending
on the wall mount. Be sure to use the proper
length.
For more information, refer to the instructions
supplied with the wall mount.
15