14
ASSEMBLING AND PREPARING
Mounting on a table
1
Lift and tilt the TV into its upright position on a
table.
Leave a 10 cm (4 inches) (minimum) space
from the wall for proper ventilation.
10 cm
CAUTION
Disconnect the power cord first, and then move
or install the TV. Otherwise electric shock may
occur.
The Kensington security system connector is
located at the back of the TV. For more information
of installation and using, refer to the manual
supplied with the Kensington security system or
visit http://www.kensington.com .
Connect the Kensington security system cable
10 cm
between the TV and a table.
10 cm
10 cm
Using the Kensington security system
NOTE
The Kensington security system is optional.
You can obtain additional accessories from
most electronics stores.