General Printing Procedure - Oki LP470b User Manual

General Printing Procedure

After the proper setup and basic configuration procedures, you
are ready to print.
1. Make sure the host computer is ready to transmit data, and
ensure that the STATUS LED is lit. (Press the PRINT button to
place the printer ONLINE.)
2. Start the print job from the computer.
3. When printing is finished, tear the label off in the direction of
the arrow in the diagram below.
Note: The number of sheets you can print is determined by the
printer's mode (continuous or dispense mode).
When you are printing linerless labels and you have torn
the labels at the wrong place, stop the printing and follow
the instructions on the next page to correct the print job.
48