Asus P5VD2-VM SE User Manual page 37

2. Keyboard / USB device wake-up (3-pin PS2_USBPW)
This jumper allows you to enable or disable the keyboard and the USB
device wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you
can wake up the computer by pressing a key on the keyboard (the default is
the Space Bar) or using a USB device. This feature requires an ATX power
supply that can supply at least 1A on the +5VSB lead, and a corresponding
setting in the BIOS.
®
P5VD2-VM SE
P5VD2-VM SE USB device wake up
• The keyboard / USB device wake-up feature requires a power supply that
can
provide 500mA on the +5VSB lead for each USB port; otherwise,
the system would not power up.
• The total current consumed must NOT exceed the power supply
capability (+5VSB) whether under normal condition or in sleep mode.
ASUS P5VD2-VM SE
PS2_USBPW
1 2 2 3
+5V +5VSB
(Default)
1-25