Table of Contents
Advertisement
Add On ROM Display Mode [Force BIOS]
Add On ROM Display Mode [Force BIOS]
Add On ROM Display Mode [Force BIOS]
Add On ROM Display Mode [Force BIOS]
Add On ROM Display Mode [Force BIOS]
Sets the display mode for option ROM.
Configuration options: [Force BIOS] [Keep Current]
Bootup Num-Lock [On]
Bootup Num-Lock [On]
Bootup Num-Lock [On]
Bootup Num-Lock [On]
Bootup Num-Lock [On]
Allows you to select the power-on state for the NumLock.
Configuration options: [Off] [On]
Wait for 'F1' If Error [Enabled]
Wait for 'F1' If Error [Enabled]
Wait for 'F1' If Error [Enabled]
Wait for 'F1' If Error [Enabled]
Wait for 'F1' If Error [Enabled]
When set to Enabled, the system waits for the F1 key to be pressed when
error occurs. Configuration options: [Disabled] [Enabled]
Hit 'DEL' Message Display [Enabled]
Hit 'DEL' Message Display [Enabled]
Hit 'DEL' Message Display [Enabled]
Hit 'DEL' Message Display [Enabled]
Hit 'DEL' Message Display [Enabled]
When set to Enabled, the system displays the message "Press DEL to run
Setup" during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Disabled]
Interrupt 19 Capture [Disabled]
Interrupt 19 Capture [Disabled]
Interrupt 19 Capture [Disabled]
Interrupt 19 Capture [Disabled]
When set to [Enabled], this function allows the option ROMs to trap
Interrupt 19. Configuration options: [Disabled] [Enabled]
2.6.3
2.6.3
Security
Security
2.6.3
2.6.3
2.6.3
Security
Security
Security
The Security menu items allow you to change the system security settings.
Select an item then press <Enter> to display the configuration options.
Security Settings
Supervisor Password
User Password
Change Supervisor Password
Change User Password
A S U S P 5 V 8 0 0 - M X
A S U S P 5 V 8 0 0 - M X
A S U S P 5 V 8 0 0 - M X
A S U S P 5 V 8 0 0 - M X
A S U S P 5 V 8 0 0 - M X
: Not Installed
: Not Installed
<Enter> to change
password.
<Enter> again to
disabled password.
2 - 3 1
2 - 3 1
2 - 3 1
2 - 3 1
2 - 3 1
Hide quick links:
Advertisement
Table of Contents
