Making Conference Calls; Placing A Conference Call - Cisco 7912G User Manual

Making Conference Calls

Making Conference Calls

Placing a Conference Call

Note
Step 1
Step 2
Step 3
Cisco IP Phone 7905G/7912G User Guide for Cisco CallManager
3-12
To remove a speed dial number from your phone, delete the phone number and
text in the appropriate field in the Speed Dials page.
Your Cisco IP Phone supports conference calls, enabling you to talk with multiple
parties at the same time.
This section covers the following topics:
Placing a Conference Call, page 3-12
•
Removing the Last Caller on a Conference Call, page 3-13
•
• Using Meet-Me Conferences, page 3-13
To turn a call into a conference call, perform the following steps.
Engaging the Hold feature generates music or a beeping tone. For this reason,
avoid putting a conference call on hold.
Procedure
During a call, press the Confrn softkey. Doing so automatically activates a new
line and puts the first party on hold.
Place a call to another number or extension.
When the call connects, press Confrn again to add the new party to the conference
call.
Repeat these steps to add parties to the conference call.
Once the conference call initiator disconnects, no additional parties can be added.
Chapter 3 Placing a Call and Other Basic Phone Tasks
78-15080-02