Windows 8/7/Vista/Xp; Driver Installation; Appendix A. Post Codes - EVGA Z77 Stinger User Manual

Windows 8/7/Vista/XP

Driver Installation

1. Insert the EVGA Z77 STINGER installation CD for the motherboard
included in the kit.
2. The CD will autorun, install the drivers and utilities listed on the install
screen. If the CD does not run, go to My Computer and click on the CD
to open.
This section provides the AMI POST Codes (Table 6) for the EVGA Z77
STINGER Motherboard during system boot up.
The POST Codes are displayed on the Debug LED readout located directly
onboard the motherboard.
This Debug LED will also display current CPU
temperatures after the system has fully booted
into the Operating System.
Table 4.
01 Power on. Reset type detection (soft/hard).
02 AP initialization before microcode loading
03 North Bridge initialization before microcode loading
04 South Bridge initialization before microcode loading
05 OEM initialization before microcode loading
06 Microcode loading
07 AP initialization after microcode loading
08 North Bridge initialization after microcode loading
09 South Bridge initialization after microcode loading

Appendix A. POST Codes

AMI POST Code
EVGA Z77 Stinger Motherboard
Debug LED with CPU
Temperature Monitor
23