Table of Contents
Advertisement
F_AUDIO(H)
9) mSATA (Solid-State Drive Connector, Controlled by the Intel Z68 Chipset)
The mSATA connector conforms to SATA 3Gb/s standard and can connect to a single solid-state drive.
When the mSATA connector is installed with a solid-state drive, the SATA2_5 connector will become
unavailable.
DB_PORT
Voltage measurement module(X58A-OC)
PCIe power connector (SATA)(X58A-OC)
10) GSATA3_6/7 (SATA 6Gb/s Connectors, Controlled by Marvell 88SE9172 Chip)
The SATA connectors conform to SATA 6Gb/s standard and are compatible with SATA 3Gb/s and SATA
1.5Gb/s standard. Each SATA connector supports a single SATA device. The Marvell 88SE9172 chip
supports RAID 0 and RAID 1. Refer to Chapter 5, "Configuring SATA Hard Drive(s)," for instructions on
configuring a RAID array.
BUG
RT
Hardware Installation
F_PANEL(NH)
BIOS Switcher (X58A-OC)
1
M_SATA
1
PWM Switch (X58A-OC)
3
2
1
DIP
DIP
1 2 3
A RAID 0 or RAID 1 configuration requires two hard drives.
mSATA
GSATA3_7
1
7
1
7
GSATA3_6
Please connect the L-shaped end of
the SATA cable to your SATA hard
drive.
- 26 -
F_PANEL
(H61M-D2)
Pin No. Definition
1
GND
2
TXP
3
TXN
4
GND
5
RXN
6
RXP
7
GND
Hide quick links:
Advertisement
Table of Contents
