Gigabyte GA-Z68XP-UD3 User Manual page 21

USB 3.0/2.0 Port
The USB 3.0 port supports the USB 3.0 specification and is compatible to the USB 2.0/1.1 specification.
Use this port for USB devices such as a USB keyboard/mouse, USB printer, USB flash drive and etc.
RJ-45 LAN Port
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. The following
escribes the states of the LAN port LEDs.
Connection/
Connection/Speed LED:
Speed LED Activity LED
State
Orange
Green
Off
LAN Port
Center/Subwoofer Speaker Out Jack (Orange)
Use this audio jack to connect center/subwoofer speakers in a 5.1/7.1-channel audio configuration.
Rear Speaker Out Jack (Black)
Use this audio jack to connect rear speakers in a 7.1-channel audio configuration.
Side Speaker Out Jack (Gray)
Use this audio jack to connect side speakers in a 4/5.1/7.1-channel audio configuration.
Line In Jack (Blue)
The default line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc.
Line Out Jack (Green)
The default line out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be
used to connect front speakers in a 4/5.1/7.1-channel audio configuration.
Mic In Jack (Pink)
The default Mic in jack. Microphones must be connected to this jack.
In addition to the default speakers settings, the ~
different functions via the audio software. Only microphones still MUST be connected to the
default Mic in jack (
figuration in Chapter 5, "Configuring 2/4/5.1/7.1-Channel Audio."
Activity LED:
Description
1 Gbps data rate
100 Mbps data rate
10 Mbps data rate
). Refer to the instructions on setting up a 2/4/5.1/7.1-channel audio con-
- 21 -
State Description
Blinking Data transmission or receiving is occurring
Off No data transmission or receiving is occurring
audio jacks can be reconfigured to perform
Hardware Installation