Gigabyte GA-Z77-D3H User Manual page 63

B. Updating the BIOS
In the main menu of Q-Flash, use the keyboard or mouse to select an item to execute. When updating the
BIOS, choose the location where the BIOS file is saved. The following procedure assumes that you save the
BIOS file to a USB flash drive.
Step 1:
1. Insert the USB flash drive containing the BIOS file into the computer. In the main menu of Q-Flash, select
Update BIOS From Drive.
Save BIOS to Drive option allows you to save the current BIOS file.
The
•
Q-Flash only supports USB flash drive or hard drives using FAT32/16/12 file system.
•
If the BIOS update file is saved to a hard drive in RAID/AHCI mode or a hard drive attached to
•
an independent SATA controller, use the <End> key during the POST to access Q-Flash.
2. Select Flash Disk.
Model Name : Z77-D3H
BIOS Version : F3c
BIOS Date
Flash Type/Size : MXIC 25L6465E/6406E
3. Select the BIOS update file.
Make sure the BIOS update file matches your motherboard model.
Step 2:
The process of the system reading the BIOS file from the USB flash drive is displayed on the screen. When
the message "Are you sure to update BIOS?" appears, select Yes to begin the BIOS update. The monitor will
display the update process.
Do not turn off or restart the system when the system is reading/updating the BIOS.
•
Do not remove the USB flash drive or hard drive when the system is updating the BIOS.
•
Step 3:
When the update process is complete, select Reboot to reboot the system.
Q-Flash Utility v1.02
: 01/31/2012
Update BIOS From Drive
Save BIOS to Drive
Select Device
Return to BIOS setup
Flash Disk
Q-Flash
BIOS update is completed.
Power off
Reboot
- 63 -
8MB
Unique Features