Touch [SET].
Focus on the subject and take a picture.
A When Burst Mode is set to high speed [H].
•
Hold down the shutter button fully to activate the Burst Mode.
∫ Focusing in Burst Mode
The focus changes depending on the setting for [FOCUS PRIORITY]
[CUSTOM] menu and the Focus Mode setting.
Focus Mode
AFS
¢1
AFF/AFC
MF
¢1 When the subject is dark or the burst speed is set to [SH], the focus is fixed on the first
picture.
¢2 The burst speed may become slower because the camera is continuously focusing on the
subject.
¢3 Burst speed takes priority, and focus is estimated within possible range.
Note
•
We recommend using the remote shutter (DMW-RSL1; optional) when you want to keep the
shutter button pressed fully while taking pictures in Burst Mode. Refer to
about the remote shutter.
•
When the burst speed is set to [SH] or [H] (when the Focus Mode is [AFS] or [MF]), the
exposure and White Balance are fixed at the settings used for the first picture for the
subsequent pictures as well. Depending on the brightness of the subject, the second picture
and subsequent pictures may be brighter or darker. When the burst speed is set to [H] (when
the Focus Mode is [AFF] or [AFC]), [M] or [L], they are adjusted each time you take a picture.
•
Since the shutter speed becomes slower in dark places, the burst speed (pictures/second) may
become slower.
•
When the flash is activated, you can take only 1 picture.
•
The Burst Mode is disabled in the following cases.
–
[MINIATURE EFFECT] in Creative Control Mode
–
When White Balance Bracket is set
–
When recording motion pictures
Recording
Focus Priority
ON
OFF
ON
OFF
—
- 85 -
(P152)
Focus
At the first picture
Normal focusing
Predicted focusing
Focus set with Manual Focus
P200
for information
A
in the
¢2
¢3