Customizing preferences
2 Tap [Rear Speaker].
Rear Speaker
Tapping [
as follows:
•
Full (default)
When no subwoofer is connected to the
rear output, select " Full ".
•
Subwoofer
When a subwoofer is connected to the
rear output, select " Subwoofer ".
Even if you change this setting, there will be
no output unless you turn the subwoofer
output on.
For details, refer to Using the subwoofer
output on page 37.
If you change this setting, subwoofer
output in the audio menu will return to the
factory settings.
Setting the RCA output
This product's preout (RCA rear output or
subwoofer output) can be used for a full-range
Full
speaker (
) or subwoofer (
connection.
Initially, the product is set for a rear full-range
Full
speaker connection (
" Preout " can be set only when the source is
set to " OFF ".
1 Display the "System" screen.
For details, refer to Customizing the system
settings on the previous page.
2 Tap [Preout].
Preout
Tapping [
] changes the settings as
follows:
•
Subwoofer (default)
When a subwoofer is connected to the
RCA rear output, select " Subwoofer ".
•
Full
When no subwoofer is connected to the
RCA rear output, select " Full ".
Even if you change this setting, there will be
no output unless you turn the subwoofer
output on.
For details, refer to Using the subwoofer
output on page 37.
] changes the settings
Subwoofer
)
).
If you change this setting, subwoofer
output in the audio menu will return to the
factory settings.
Selecting the system language
The system language can be selected from
three languages.
If the embedded language and the selected
language setting are not the same, text in-
formation may not display properly.
Some characters may not be displayed
properly. Text that cannot be displayed is
displayed as "_" (underbar).
1 Display the "System" screen.
For details, refer to Customizing the system
settings on the previous page.
2 Tap [System Language].
System Language
The "
3 Tap the desired language.
English (default)
Français, Español
,
" screen appears.
En
Chapter
09
39