ViewSonic Pro8500 User Manual page 38

be used when DHCP is set to No.
The Subnet Mask "0.0.0.0" is prohibited.
Default Gateway: A server (or router) to communicate across networks (subnets)
that are divided by Subnet Mask. This function can only be used when DHCP is
set to No.
DNS: Setup DNS server address when DHCP is disable.
Apply: Save and execute the wired LAN settings.
Wirless LAN
Allow you to configure the wireless LAN settings.
Status: Display the projector's status.
SSID: Display the projector's SSID information.
SSID Display: Select if you want to display the projector's SSID.
Connection Mode: Methods for connecting to wireless networks with Wi-Fi
enabled devices.
AP: The projector is cabled to the wired network to allow other wireless
clients access to. The projector also supports a network control or web
server.
Infrastructure: A wireless networking bridges (joins) a wireless network to a
wired Ethernet network.
DHCP: Abbreviation for Dynamic Host Configuration Protocol. This protocol
automatically assigns IP Address to networked devices.
When the "DHCP" sets to "Yes", it takes some time to obtain IP address from
DHCP server.
When the "DHCP" sets to "No", that means user will set IP address by
manually.
IP Address: Numerical address to identify networked computers. This function
can only be used when DHCP is set to No.
The IP Address is the number that identifies this projector on the network.
You cannot have two devices with the same IP Address on the same
network.
The IP Address "0.0.0.0" is prohibited.
Subnet Mask: A numeric value to define the number of bits used for a network
address of a divided network (or subnet) in an IP Address. This function can only
be used when DHCP is set to No.
The Subnet Mask "0.0.0.0" is prohibited.
Apply: Save and execute the wireless LAN settings.
Information
Input Source
Display the current input source.
ViewSonic Pro8500 36