Panasonic PT-FW430U Operating Instructions Manual page 39

Using Web Browser (continued)
Command port set up page
Set the port number to be used with command control.
Click [Detailed set up] → [Command port set up].
1 Input the port number to be used with command control
2 Setting update button
ECO management set up page
The setting of ECO management of the projector can be performed.
Settings performed here are the same as the settings performed with "PROJECTOR SETUP" → "LAMP POWER",
"PROJECTOR SETUP" → "ECO MANAGEMENT" → "AUTO POWER SAVE", "PROJECTOR SETUP" → "ECO
MANAGEMENT" → "SIGNAL DETECTION" of the projector.
Click [Detailed set up] → [ECO management set up].
1 Select the setting of "LAMP POWER"
2 Select the setting of "AUTO POWER SAVE"
3 Select the setting of "AMBIENT LIGHT
DETECTION"
4 Select the setting of "SIGNAL DETECTION"
1
2
1
2
3
4
5
6
7
5 Select the setting of "AV MUTE DETECTION"
6 Select the setting of "NO SIGNAL SHUT-OFF"
7 Setting update button
39