Panasonic PT-FW430U Operating Instructions Manual page 32

Using Web Browser (continued)
Adjust clock page
Click [Detailed set up], then [Adjust clock] to display the Adjust clock page.
1 Time zone selection
2 Button to update time zone setting
3 Turn this [ON] to set the date and
time automatically.
If the time becomes incorrect immediately after setting the correct time, then the battery needs to be changed.
Contact the dealer where you bought the projector to have the battery changed.
Ping test page
This page makes it possible to check whether the network is connected to the e-mail server, POP server, DNS
server, etc.
Click [Detailed set up], then [Ping test] to display the Ping test page.
1 Enter the IP address of the server to be tested.
2 Button for conducting the test.
32
1
2
3
4
5
6
7
4 When setting the date and time automatically, input the IP
address or name of the NTP server. (When inputting the server
name, the DNS server must be set.)
5 New date field
6 New time field
7 Button to update time and date settings
Display which appears when the connection
was successful.
1
2
Display which appears when the connection
failed.