Navigating The Menus; Selecting A Channel; Adjusting The Volume; Viewing Channel Information - Insignia NS-26E340A13 User Manual

Settings menu (TV mode)
Photos menu (USB mode)
Browse Photos
Favorite Photos
View Slideshow
Settings
Find photos that are on the USB flash drive.

Navigating the menus

Press MENU to open the on-screen menu.
Press the right or left arrow to move the
cursor on the screen or to adjust a selected
item.
Press the up or down arrow to select menu
options.
Press OK to confirm a selection or enter a
sub-menu.
Press MENU to return to the previous menu.
Press EXIT to close the menu.
22
English
On
Picture Audio Channels Settings Photos
www.insigniaproducts.com
NS-26E340A13 Insignia 26" LED TV

Selecting a channel

To select a channel:
• Press CH or CH
channel on the memorized channel list.
• Press the number buttons to enter the analog or
main digital channel number you want, then wait
for the channel to change or press OK to
immediately change the channel.
• To select a digital sub-channel, press the number
buttons to select the main digital channel, press
(dot), then press the number button for the
sub-channel. Wait for the channel to change, or
press OK to immediately change the channel. For
example, to tune to channel 5.1, press 5,
then 1.
Note
Button presses must be within three seconds of each
other.
• Press (return) to go to the last viewed channel.
• Press CH-LIST to open the channel list, press
to highlight a channel, then press OK. Hidden
channels are grayed and cannot be selected. See
"Hiding channels" on page 27.
• Press FAVORITE to open the favorite channel list,
press or to highlight a channel, then press
OK.
Note
If a list has more than one page, press
scroll through the pages.

Adjusting the volume

To adjust the volume:
• Press VOL+ or VOL– to increase or decrease the
volume.
• Press MUTE to turn off the sound. Press
MUTE again to turn the sound back on.

Viewing channel information

To view channel information:
• Press INFO to view an information banner. The
information banner shows the current program
information such as channel number, video input
source, and resolution.
• Digital channel information—Displays the
channel number, station name, channel label,
broadcast program name, TV rating, signal
type, audio information, resolution, CC mode,
current time, and current program start and
end times.
• Analog channel information—Displays
channel number, channel label (if present),
signal type, audio information, and resolution.
to go to the next or previous
(dot),
or
to
or