Insignia NS-26E340A13 User Manual page 15

Insignia 26" LED TV
Using composite video (good)
To connect a cable or satellite box using
composite video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an A/V cable (not provided) to the
AV IN VIDEO/Y jack and AUDIO L/R jacks on the
side of your TV and to the composite video and
audio out jacks on the cable or satellite box.
Note
• The AV IN VIDEO jack shares the AUDIO L/R
jacks with the COMPONENT IN video jacks.
• When you connect the audio using the
AUDIO L/R jacks, the audio output is analog.
Cables are often color-coded
to match color-coded jacks.
Note: The yellow video
connector on the AV cable
connects to the green video
jack.
Cable or satellite box
4 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite TV box.
5 Go through the Setup Wizard on page 19.
Side of TV
A/V cable
www.insigniaproducts.com
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a coaxial cable (not provided) to the
ANT/CABLE jack on the back of your TV and to
the coaxial out jack on the cable or satellite box.
HDMI 1 HDMI 2 / DVI
4 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite TV box.
5 Go through the Setup Wizard on page 19.
Notes
• Use a coaxial cable to eliminate interference and
noise from radio waves.
• Do not bundle the coaxial cable with the power
cord or other cables.
Cable or satellite box
Coaxial cable
PC / DVI
VGA
DIGITAL OUTPUT
AUDIO IN ANT / CABLE
Back of TV
11