Insignia NS-24L120A13 User Manual page 15

Insignia 24" LCD TV
Using composite video (good)
To connect a cable or satellite box using
composite video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an AV cable (not provided) to the
AV IN VIDEO jack and L/R AUDIO jacks on the
back of your TV and to the composite video and
audio out jacks on the cable or satellite box.
Note
• The AV IN VIDEO jack shares the AV IN
L/R AUDIO jacks with the COMPONENT IN
video jacks.
• When you connect the audio using the AV IN
L/R AUDIO jacks, the audio output is analog.
Cables are often color-coded
to match color-coded jacks.
PC / DVI DIGITAL
AUDIO IN OUTPUT
4 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite TV box.
5 Go through the Setup Wizard on page 19.
Cable or satellite box
AV cable
COMPONENT IN AV IN
Y P P VIDEO L - AUDIO - R
B R
Back of TV
www.insigniaproducts.com
Using coaxial (good)
To connect a cable or satellite box using coaxial:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a coaxial cable (not provided) to the
ANT/CABLE jack on the back of your TV and to
the coaxial out jack on the cable or satellite box.
COMPONENT IN
DIGITAL
OUTPUT Y
4 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite TV box.
5 Go through the Setup Wizard on page 19.
ANT
Notes
•
•
Cable or satellite box
AV IN
P P VIDEO L - AUDIO - R
B R
Back of TV
Use a coaxial cable to eliminate interference and
noise from radio waves.
Do not bundle the coaxial cable with the power
cord or other cables.
ANT / CABLE
11