Insignia NS-24L120A13 User Manual page 14

Using DVI (same as HDMI but requires a sound
connection)
Note
You must use the HDMI 2/DVI jack to connect a
cable or satellite box using DVI. If you use the HDMI 1
jack, you will not hear sound.
To connect a cable or satellite box using DVI:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect an HDMI-DVI adapter (not provided) to
one end of an HDMI cable (not provided), then
connect the adapter to the DVI OUT jack on the
cable or satellite box.
4 Connect the other end of the cable to the
HDMI 2/DVI jack on the back of your TV.
USB HDMI 1 HDMI 2 / DVI
5 Connect a 3.5mm audio cable (not provided) to
the PC/DVI AUDIO IN jack on the back of your
TV and to the AUDIO OUT jacks on the cable or
satellite TV box.
Note
When you connect the audio using the PC/DVI
AUDIO IN jack, the audio output is analog.
6 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite TV box.
7 Go through the Setup Wizard on page 19.
10
Cable or satellite box
HDMI cable with
HDMI-DVI adapter
CO
PC / DVI DIGITAL
VGA AUDIO IN OUTPUT Y
Back of TV
www.insigniaproducts.com
NS-24L120A13 Insignia 24" LCD TV
Using component video (better)
To connect a cable or satellite box using
component video:
1 Make sure that your TV's power cord is
unplugged, and all connected equipment is
turned off.
2 Connect the incoming cable from the cable wall
jack to the cable-in jack on the cable or satellite
box.
3 Connect a component video cable (not
provided) to the COMPONENT IN Y, P
video jacks on the back of your TV and the
component video out jacks on the cable or
satellite box.
Cables are often
color-coded to match
color-coded jacks.
PC / DVI DIGITAL
AUDIO IN OUTPUT
4 Connect an audio cable (not provided) to the
AV IN L/R AUDIO jacks on the back of your TV
and to the audio out jacks on the cable or
satellite TV box.
Note
• The COMPONENT IN video jacks share the
AV IN L/R AUDIO jacks with the AV IN VIDEO
jack.
• When you connect the audio using the
AV IN L/R AUDIO audio jacks, the audio output
is analog.
5 Plug your TV's power cord into a power outlet,
turn on your TV, then turn on the cable or
satellite TV box.
6 Go through the Setup Wizard on page 19.
, and P
B
Cable or satellite box
COMPONENT IN AV IN
Y P P VIDEO L - AUDIO - R
B R
Back of TV
R
ANT