Asus P5K DELUXE User Manual page 53

P5K DELUXE
P5K DELUXE IDE connector
3. ICH9R Serial ATA connectors (7-pin SATA1 [red], SATA2 [red], SATA3
[black], SATA4 [black], SATA5 [red], SATA6 [red])
These connectors are for the Serial ATA signal cables for Serial ATA hard disk
drives.
If you installed Serial ATA hard disk drives, you can create a RAID 0 and
RAID 1 configuration with the Intel
onboard Intel
®
• These connectors are set to Standard IDE mode by default. In Standard
IDE mode, you can connect Serial ATA boot/data hard disk drives to these
connectors. If you intend to create a Serial ATA RAID set using these
connectors, set the Configure SATA as item in the BIOS to [RAID]. See
section 4.3.6 SATA Configuration for details.
Before creating a RAID set, refer to 5.4.2 Intel RAID Configuration or the
•
manual bundled in the motherboard support DVD.
P5K DELUXE
P5K DELUXE SATA connectors
ASUS P5K Deluxe
PRI_EIDE
NOTE: Orient the red markings
(usually zigzag) on the IDE
ribbon cable to PIN 1.
ICH9R RAID controller.
SATA1
SATA2
SATA5
Matrix Storage Technology through the
®
GND GND
RSATA_TXP1 RSATA_TXP3
RSATA_TXN1 RSATA_TXN3
GND GND
RSATA_RXP1 RSATA_RXP3
RSATA_RXN1 RSATA_RXN3
GND GND
GND GND
RSATA_TXP2 RSATA_TXP4
RSATA_TXN2 RSATA_TXN4
GND GND
RSATA_RXP2 RSATA_RXP4
RSATA_RXN2 RSATA_RXN4
GND GND
GND GND
RSATA_TXP5 RSATA_TXP6
RSATA_TXN5 RSATA_TXN6
GND GND
RSATA_RXP5 RSATA_RXP6
RSATA_RXN5 RSATA_RXN6
GND GND
PIN 1
SATA3
SATA4
SATA6
2-27