Bulletin Board System; Automated Fax - HP D5970A - NetServer - LCII User Manual

Chapter 7

Bulletin Board System

The HP NetServer Support BBS is for downloading only. Messages asking
support questions should be left in the HPPC forum on CompuServe.
The HP NetServer Support BBS has eight lines. The Datacomm specifications are
as follows:
300/1200/2400/9600/14400 baud
103/212/V22bis/HST/V32/V32bis/V42 bis/MNP standards
No parity, 8 data bits, 1 stop bit (N,8,1)
ASCII, XMODEM, 1K-XMODEM, YMODEM, YMODEM-G,
YMODEM-batch, ZMODEM, KERMIT, and Super Kermit file
transfer protocols
Call (1 408) 553-3500 to connect to the HP NetServer Support BBS.

Automated Fax

HP's automated fax system contains full product data sheets, configuration and
price guides, and a subset of the HP NetServer support information.
In the U.S., call (1 800) 333-1917 from a push button tone phone to request that an
index of available documents be sent to your fax machine. Call again to select the
documents that you want transmitted.
Outside the U.S. and Canada, call (1 208) 344-4809 from your fax machine. Use
the handset and touch-tone keyboard on your fax machine to request an index of
available documents. After you have made your choice, you are instructed to
press START on your fax machine and hang up the handset. The telephone
connection is maintained and used to send the fax to your machine. Call again
from your fax machine to select the documents that you want transmitted to you.
If you are using a fax modem instead of a fax machine, this process works only if
your fax software provides a START command.
Service and Support
37