Maximizing Battery Discharge Time - HP ProBook 5320m - Notebook PC User Manual

The battery charges whether the computer is off or in use, but it charges faster when the computer is
off.
Charging may take longer if a battery is new, has been unused for 2 weeks or more, or is much warmer
or cooler than room temperature.
To prolong battery life and optimize the accuracy of battery charge displays, follow these
recommendations:
●
If you are charging a new battery, charge it fully before turning on the computer.
●
Charge the battery until the battery light turns off.
NOTE:
area may show 100 percent charge before the battery is fully charged.
●
Allow the battery to discharge below 5 percent of a full charge through normal use before charging
it.
●
If the battery has been unused for one month or more, calibrate the battery instead of simply
charging it.
The battery light displays charge status:
●
Amber: A battery is charging.
●
White: A battery is close to full charge capacity.
●
Blinking amber: A battery that is the only available power source has reached a low battery level.
When the battery reaches a critical battery level, the battery light begins blinking rapidly.
●
Off: If the computer is plugged into an external power source, the light turns off when all batteries
in the computer are fully charged. If the computer is not plugged into an external power source,
the light stays off until the battery reaches a low battery level.

Maximizing battery discharge time

Battery discharge time varies, depending on the features you use while on battery power. Maximum
discharge time gradually shortens as the battery storage capacity naturally degrades.
Tips for maximizing battery discharge time:
●
Lower the brightness on the display.
●
Remove the battery from the computer when it is not being used or charged.
● Store the battery in a cool, dry location.
● Select the Powersave setting in Power Management.
To select the Powersave setting in Power Management:
1. Select Computer > Control Center > Power Management.
2. Under the General tab, click System Settings.
3. Under Battery Powered, select Powersave.
4. Click Finish.
If the computer is on while the battery is charging, the battery meter in the notification
Using battery power 35