HP Xw460c - ProLiant - Blade Workstation User Manual page 81

Using Remote Graphics Software
turned on, where the logSetup file in the installation directory is set for output to a
file named rg.log at INFO debug level.
[-v | -ver | -version] prints the Senders's version information.
[-h | -help | -?] prints a listing of the various command line options, those that are
listed on this page.
Windows specific command line options
The following options are only available on Windows.
-installService Installs the "Remote Graphics Sender" service.
-startService Starts the "Remote Graphics Sender" service. The Sender must be
installed as a service first.
-uninstallService Uninstalls the "Remote Graphics Sender" service.
-belownormal Sets the process priority of the Sender to below normal.
-normal Sets the process priority of the Sender to normal. This is the default
priority.
-abovenormal Sets the process priority of the Sender to above normal.
-high Sets the process priority of the Sender to high.
Linux/HP-UX specific command line options
The following options are only available on Linux and HP-UX.
-noautostartgui The RGS Sender GUI automatically starts on Linux when the
Sender process starts. To start the GUI on a per-user basis, edit the
/opt/hpremote/rgsender/rgsender.sh file, and add the -noautostartgui option. Refer
to the Linux Sender GUI Installation or HP-UX Sender GUI Installation sections for
more information.
-display value where value is the display number of the X server that the RGS
Sender will share. For example, if both X servers hostname:0 and hostname:1 are
running, use -display 1 to share the X server running at display hostname:1.
73