Scsi Cables; Using A Scsi Cable - HP Workstation xw6000 Hardware Reference Manual

Addendum to the hp workstation

Hide thumbs Also See for Workstation xw6000:

Table of Contents

Hard Drive Installation

SCSI Cables

✎

B–6

The front drive bays are available for installing or connecting mass

storage SCSI devices.

Selected models of the HP workstation xw6000 ship with a

multimode SCSI cable that supports Low Voltage Differential (LVD)

or single-ended devices. The cable accommodates up to three SCSI

devices in the front drive bay area (UATA models do not have the

SCSI cable).

Five-device SCSI cable with terminator

The cable that shipped with your workstation may look different than

the one illustrated (a five-device cable).

If you are installing a narrow SCSI device, you will need to attach a

68-pin to a 50-pin SCSI adapter.

For additional information about installing optional SCSI devices,

refer to the documentation included with the device option kit, or

contact your HP authorized dealer, reseller, or service provider.

Hardware Reference Guide

Table of Contents

Show Quick Links

Table of Contents

Xw6000