Table of Contents
Advertisement
Setup
This field displays BIOS Version and date.
When finish BIOS update, please restart your computer and press F2 into
BIOS setup manual and load BIOS default one time.
Password
User Password
This option allows you to set or reset the user password for power on.
Not Registered
Registered
To enter a user password:
1. Select Registered to display the following prompt:
Enter Password:
Enter a password of up to 8 characters. The character string you enter is
displayed as a string of asterisks. For example, if you enter a password
consisting of four characters, the display is shown as:
Enter Password: ****
2. Click the OK button. The following message appears, allowing you to
verify the password.
Verify Password:
3. If character strings match, the password is registered click OK button. If
they do not match, the following message appears. You must repeat
from step 1.
Entry Error!!!
To delete a user password:
1. Select Not Registered to display the following prompt:
Enter Password:
2. Enter the currently registered password. The character string you enter
is displayed as a string of asterisks.
Enter Password: ****
3. Click the OK button. If the character string you enter matches the
registered password, the password option is reset and the display
changes to:
Not registered
If they do not match, the following message appears. You must repeat step 1.
Incorrect Password!!!
User's Manual
Changes or remove the password. (Default)
Sets the password. A dialogue box will appear to
allow you to set the password.
HW Setup and Passwords
7-2
Advertisement
Table of Contents
