Procedure; Connecting To A Microsoft Windows Nt 4.0 Server; Requirements - HP VL600 - Vectra - 128 MB RAM Installation Manual

Microsoft Windows NT
4.0 Workstation

6 Connecting to a Microsoft Windows NT 4.0 Server

Requirements

Operating System
Driver Version
Driver File
Server OS
Client OS

Procedure

1 With the HP Vectra turned off, install the network adapter into a PCI slot.
2 Connect the network cable to the newly installed network adapter.
3 Power on the machine and boot to Windows NT.
4 Log into Windows NT with administrator privileges.
5 The following steps are based on a first-time installation of Networking on
the system. Adding a NIC to a previously installed Networking has some
minor differences. Ask your administrator for more information.
6 Open the "Network Properties" windows and agree to install "Windows
NT Networking".
7 With "Wired to the Network" checked, click on "Next".
8 Click on the option to "Select from list..." then on "Have Disk..."
9 Insert the driver disk, type in the location of the driver, and click on "OK".
10 With "IBM Token-Ring PCI Family Adapter" highlighted, click on "OK".
11 With the "IBM Token-Ring PCI Family Adapter" listed in the "Network
Adapters:" window, click on "Next".
12 Select all the applicable network protocols and click on "Next".
13 At the "Network Services:" prompt, accept the default settings and click
on "Next".
Connecting to a Microsoft Windows NT 4.0 Server
Microsoft Windows NT 4.0 Workstation
Windows NT 4.0 Workstation
5.12.00.0040
Ibmtrp.sys
Windows NT 4.0 Server
Microsoft
11