Replacing or upgrading the hard drive
CAUTION:
Shut down the computer before removing the hard drive from the hard drive bay. Do not remove the
hard drive while the computer is on, in the Sleep state, or in Hibernation.
If you are not sure whether the computer is off or in Hibernation, turn the computer on by pressing the
power button. Then shut down the computer through the operating system.
Removing the hard drive
1.
Save your work and shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Unplug the power cord from the AC outlet and remove the battery.
4.
To access the hard drive cover screw, remove the memory module compartment cover.
NOTE:
5.
Loosen the hard drive cover screw (1).
6.
Remove the hard drive cover (2).
7.
Disconnect the hard drive cable (1) from the computer.
8.
Remove the 4 hard drive screws (2).
To prevent information loss or an unresponsive system:
For more information, refer to
Adding or replacing memory modules on page
Replacing or upgrading the hard drive
29.
27