Sony Cyber-shot DSC-W730 Instruction & Operation Manual page 11

Digital still camera
Hide thumbs Also See for Cyber-shot DSC-W730:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Notes
• If the Charge lamp on the camera flashes when the AC Adaptor is connected to the
wall outlet (wall socket), this indicates that charging is temporarily stopped
because the temperature is outside the recommended range. When the temperature
gets back within the appropriate range, the charging resumes. We recommend
charging the battery pack in an ambient temperature of between 10°C to 30°C
(50°F to 86°F).
• The battery pack may not be effectively charged if the terminal section of the
battery is dirty. In this case, wipe any dust off lightly using a soft cloth or a cotton
swab to clean the terminal section of the battery.
• Connect the AC Adaptor (supplied) to the nearest wall outlet (wall socket). If
malfunctions occur while using the AC Adaptor, disconnect the plug from the wall
outlet (wall socket) immediately to disconnect from the power source.
• When charging is finished, disconnect the AC Adaptor from the wall outlet (wall
socket).
• Be sure to use only genuine Sony brand battery packs, dedicated USB cable
(supplied) and AC Adaptor (supplied).
x
Charging time (Full charge)
The charging time is approximately 115 min. using the AC Adaptor
(supplied).
Notes
• The above charging time applies when charging a fully depleted battery pack at a
temperature of 25°C (77°F). Charging may take longer depending on conditions of
use and circumstances.
GB
GB
11

Advertisement

Table of Contents
loading

Table of Contents