Chapter 6
2. Power off the HP Server and unplug the power cord/s from the power source. Remove the covers.
a. Locate the NIC and reseat it in its slot.
b. Replace the covers; plug in the power cord/s to a power source, and power on the HP Server.
c. If the problem persists, perform previous step 2 but move the NIC to another slot.
d. Replace the covers; plug in the power cord/s to a power source, and power on the HP Server.
If the problem persists, call the HP Customer Support Center for further troubleshooting assistance before
replacing any parts.
20
Troubleshooting