HP t5740e - Thin Client Hardware Reference Manual page 31

Hp t5740/t5745 thin clients hardware reference guide

Hide thumbs Also See for t5740e - Thin Client:

Table of Contents

To use the HP Quick Release with a VESA-configured thin client:

Using four 15 mm screws included in the mounting device kit, attach one side of the HP Quick

Release to the thin client as shown in the following illustration.

Figure C-2

Using four screws included in the mounting device kit, attach the other side of the HP Quick

Release to the device to which you will mount the thin client. Make sure the release lever points

upward.

Figure C-3

ENWW

Connecting the HP Quick Release to the thin client

Connecting the HP Quick Release to another device

HP Quick Release

Table of Contents

Show Quick Links

Table of Contents

T5740 T5745