Canon PowerShot ELPH 130 IS User Manual page 51

• To change the number of shots, press the <o><p> buttons after choosing
[ ] in step 1. [Blink Detection]
Using the Wink Self-Timer
Aim the camera at a person and press the shutter button all the way down.
The camera will shoot about two seconds after a wink is detected.
1
Choose [ ].
z z Follow steps 1 – 2 in "Specific Scenes"
(=
press the <p> button.
z z Press the <q><r> buttons to choose
[
2
Compose the shot and press
the shutter button halfway.
z z Make sure a green frame is displayed
around the face of the person who will
wink.
3
Press the shutter button all the
way down.
X X The camera now enters shooting standby
mode, and [Wink to take picture] is
displayed.
The lamp blinks and the self-timer sound
X X
is played.
(= 41) is only available for the final shot.
Still Images
45) and choose [ ], and then
], and then press the <m> button.
4
Face the camera and wink.
X X The camera will shoot about two seconds
after detecting a wink by the person
whose face is inside the frame.
z z To cancel shooting after you have
triggered the self-timer, press the
<n> button.
• If the wink is not detected, wink again slowly and deliberately.
• Winking may not be detected if eyes are obscured by hair, a hat, or glasses.
•
Closing and opening both eyes at once will also be detected as a wink.
• If winking is not detected, the camera will shoot about 15 seconds later.
• To change the number of shots, press the <o><p> buttons after choosing
[ ] in step 1. [Blink Detection] (=
• If no one is in the shooting area when the shutter button is pressed all the way
down, the camera will shoot after a person enters the shooting area and winks.
Using the Face Self-Timer
The camera will shoot about two seconds after detecting that the face of
another person (such as the photographer) has entered the shooting area
(= 61). This is useful when including yourself in group photos or similar
shots.
1
Choose [ ].
z z Follow steps 1 – 2 in "Specific Scenes"
(=
press the <p> button.
z z Press the <q><r> buttons to choose
[
41) is only available for the final shot.
Still Images
45) and choose [ ], and then
], and then press the <m> button.
Cover
Preliminary Notes and
Legal Information
Contents:
Basic Operations
Basic Guide
Advanced Guide
1
Camera Basics
2
Smart Auto
Mode
3
Other Shooting
Modes
4
P Mode
5
Playback Mode
6
Wi-Fi Functions
7
Setting Menu
8
Accessories
9
Appendix
Index
51