Before You Begin
Removal Sequence
Product Description
Removal and Replacement Procedures
Electrostatic
Discharge
Service
Considerations
Cables and
Connectors
Preparing the
Computer for
Disassembly
Battery Pack
Hard Drive
Keyboard
Memory
Module
Modem
Heatspreader
Processor
Display Panel
Assembly
Upper CPU
Cover with
Palmrest and
TouchPad
Hard Drive/
Battery Charger
Board
Converter
Board
Low Voltage
Differential
Signal Board
Fan Assembly
System Board
Speaker
Assembly
DVD or CD
Drive
Maintenance & Service Guide
Presario 1900 Series
Models: XL1, XL160, XL161, XL162, XL163, and XL165
Specifications
Troubleshooting
Pin Assignments
Parts Catalog
Battery Operations
Index
Removing the Hard
Drive/Battery
Charger Board
To remove the hard
drive/battery charger
board, complete the
following steps:
1.
Prepare the computer for
disassembly.
2.
Remove the keyboard.
3.
Remove the heatspreader.
4.
Remove the display
assembly with flex cables
attached.
5.
Remove the Upper CPU
Cover with
Palmrest/TouchPad/Fan.
6.
Remove four screws from
the hard drive/battery
charger board located front
center portion of the
chassis.
To replace the hard
drive/battery charger board
reverse the previous
procedures.