Xm Connector; Antenna Terminals - Denon DHT-788BA Owner's Manual

Owners manual - english
Hide thumbs Also See for DHT-788BA:
Table of Contents

Advertisement

XM connector

®
• The AVR-788 is an XM Ready
receiver. You can receive XM
Satellite Radio by connecting to the XM Mini-Tuner and Home Dock
(includes home antenna, sold separately) and subscribing to the XM
service.
• Plug the XM Mini-Tuner and Home Dock into the XM connector on
the rear panel.
• Position the Home Dock antenna near a south-facing window to
receive the best signal.
For details, see "Listening to XM Satellite Radio Programs" (vpage
43, 44).
When making connections, also refer to the operating instructions of
the XM Mini-Tuner and Home Dock.
XM Mini-Tuner and Home Dock
XM
NOTE
Keep the power cord unplugged until the XM Mini-Tuner and Home
Dock connection have been completed.
• The XM name and related logo are registered trademarks of XM
Satellite Radio Inc. All rights reserved.
• XM Ready is a registered trademark of XM Satellite Radio Inc. All
rights reserved.

Antenna terminals

®
An F-type FM antenna cable plug can be connected directly.
AM outdoor antenna
AM loop antenna assembly
Remove the vinyl tie and take
out the connection line.
a. With the antenna on top of
any stable surface.
Mount
Direction of broadcasting station
AM loop antenna
(supplied)
Ground
Connect to the AM
antenna terminals.
• Do not connect two FM antennas simultaneously.
• Even if an external AM antenna is used, do not
Bend in the reverse direction.
• Make sure the AM loop antenna lead terminals do not
b. With the antenna attached
to a wall.
Installation hole Mount on wall, etc.
FM antenna
75 Ω/ohms
Coaxial cable
FM indoor antenna
(supplied)
Connection of AM antennas
1. Push the
2. Insert the
3. Return the
lever.
conductor.
lever.
NOTE
disconnect the AM loop antenna.
touch metal parts of the panel.
Note to CATV system installer:
This reminder is provided to call the CATV system
installer's attention to Article 820-40 of the NEC
which provides guidelines for proper grounding and,
in particular, specifies that the cable ground shall be
connected to the grounding system of the building,
as close to the point of cable entry as practical.
ENGLISH


Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-788

Table of Contents