Physical Characteristics; Seek Time - Seagate ST340016A Product Manual

Barracuda ATA IV Family Product Manual, Rev. B

1.4 Physical characteristics

Drive specification
Maximum height (mm)
(inches)
Maximum width (mm)
(inches)
Maximum length (mm)
(inches)
Typical weight (grams)
(pounds)

1.5 Seek time

Seek measurements are taken with nominal power at 25°C ambient
temperature. All times are measured using drive diagnostics. The spec-
ifications in the table below are defined as follows:
•
Track-to-track seek time is an average of all possible single-track
seeks in both directions.
•
Average seek time is a true statistical random average of at least 5,000
measurements of seeks between random tracks, less overhead.
Typical seek times (msec)
Track-to-track
Average
1 disc
2 disc
Average latency:
Note. These drives are designed to consistently meet the seek times rep-
resented in this manual. Physical seeks, regardless of mode (such as
track-to-track and average), are expected to meet or exceed the noted
values. However, due to the manner in which these drives are format-
ted, benchmark tests that include command overhead or measure
logical seeks may produce results that vary from these specifications.
ST380021A, ST360021A,
ST340016A, ST320011A
26.1
1.028
101.8
4.01
147.0
5.787
635
1.40
Read
0.95
9.0
9.5
4.16
7
Write
0.76
10.0
10.5
4.16