Creating Audio Cds; Creating Video Discs - HP s3320f - Pavilion - Slimline Getting Started Manual

144
Getting Started (features vary by model)

Creating audio CDs

This section provides instructions for burning an audio CD that can be played in most
home and car CD players.
To create an audio CD:
1 Insert a writable CD into the disc-burning drive.
CD-R discs play in most home and car stereos, DVD players, and computers. CD-RW
discs play only in some stereos, DVD players, and computers.
2 Click the Windows Start Button
click CyberLink DVD Suite.
3 Click the icon in the lower-right corner of the window to open a list of CyberLink
programs, and then click Power2Go.
4 Select the Music Disc icon.
5 Select the disc type, CD or DVD, select the content type, and then click OK.
6 Locate the music files that you want to add, and then click them and drag them to the
bottom half of the Power2Go window.
7 When you are done adding files, click the Burn icon in the toolbar.
NOTE: For more help using CyberLink Power2Go, click the Help icon in the
program.
8 Select the recording options. See "Audio CD tips."
9 Click Burn to begin recording your music files to disc.
10 Click OK when the audio CD is completed.

Creating video discs

This section provides instructions for creating a video disc. You can create a video disc
from files on the computer hard disk drive or directly from a digital video camera.
1 Insert a writable disc into the disc-burning drive.
2 Open the CyberLink PowerDirector program by clicking the Windows Start
Button , All Programs, and then clicking CyberLink DVD Suite.
3 Click the icon in the lower-right corner of the window to open a list of CyberLink
programs, and then click PowerDirector.
on the taskbar, All Programs, and then