Optional Features; Installation Requirements - Epson Stylus Pro - Stylus Color Pro Ink Jet Printer Installation And Operation Manual

PowerRIP Manual

Optional Features

PowerRIP can be configured to speak critical messages using the optional
Speech Recognition feature available from Apple™ Computer, Inc.

Installation Requirements

PowerRIP will run on any Macintosh computer with the following configuration:
Macintosh Centris, Quadra, or PowerMac. For the Centris and Quadra,
l
an FPU (Floating Point Unit) is strongly recommended.
12 inch diagonal monitor or larger ("Classic" monitor not supported).
l
A t l e a s t 12MB of RAM (7.5MB f P
l
For optimal performance, at least 16 MB of RAM is highly recommended. Also,
any memory requirements for optional software, e.g., OPI server, must be added
to this total.
See page 29 for suggestions on increasing your available memory (RAM).
At least 80 MB of disk space (6-7 MB required for installation). As the maxi-
l
mum number of files in the jobs folders increases, this disk space requirement
increases. Furthermore, when "Faster Copies" is selected, rendered images will be
spooled to disk, requiring even more disk space.
System 7.0 or later (System 7.1 or later recommended).
l
Any Macintosh computer with the following minimum configuration can be a
PowerRIP client:
System 6.5 or later (System 7.1 or later recommended).
l
AppleTalk or Ethertalk network connection with the PowerRIP server.
l
8 MB of RAM to install PowerRIP Client software.
l
Note: If you have less than 8 MB of RAM you will have to manually insert the
necessary files into the System Folder of this client Macintosh. First install
PowerRIP on your server Macintosh. Then go into the server's System Folder, the
Extensions subfolder, and copy the Chooser Extension PSPrinter onto a diskette or
directly, via your network, to the same location on the client Macintosh. You will
also need to copy the PPDs (PostScript Printer Descriptions) which are located in
the Printer Descriptions folder of the Extensions subfolder. The PPDs are named:
Stylus Color (with Quark).PPD, Stylus Color.PPD, Stylus Pro (with Quark).PPD,
Stylus Pro.PPD, Stylus Pro XL (with Quark).PPD, Stylus Pro XL.PPD. It is only
necessary to copy the PPDs for the EPSON Stylus you are going to use. Put the
appropriate PPDs into the Printer Descriptions folder of the Extensions subfolder
on the client Macintosh.
2
or owerRIP, 4.5 MB for system, fonts, etc.).
Birmy Graphics Corporation