Real Time Clock - Toshiba PTSE0U-02P00M User Manual

Real Time Clock

Problem
The following
message is Displayed
on the screen:
RTC Power
Failure.
Check system.
Then press
[F2] key.
Password
Problem
Cannot enter
password
Keyboard
Keyboard problems can be caused by the setup and configuration of the
computer - please refer to Chapter 5,
Problem
Some letter keys
produce numbers
Output to screen is
garbled
User's Manual
TECRA A11/S11, Satellite Pro S500
Procedure
The charge in the Real Time Clock (RTC) battery
has run out - you will need to set the date and
time in the BIOS setup application by using the
following steps:
1. Turn on the computer while pressing the
F2 key.
2. Release the F2 key when the
TOSHIBA Leading Innovation >>>
screen appears - the BIOS setup application
will load.
3. Set the date in the System Date field.
4. Set the time in the System Time field.
5. Press F10 - a confirmation message will be
displayed.
6. Press the Y key - the BIOS setup application
will end and the computer will restart.
Procedure
Please refer to the
section in Chapter 6,
Modes, for further information.
The Keyboard, for further information.
Procedure
Check that the numeric keypad overlay is not
activated - press the FN + F11 hot key and try
typing again.
Please refer to your software's documentation to
ensure that its is not remapping the keyboard in
any way (remapping involves changing or
reassigning the function of each key).
If you are still unable to use the keyboard, you
should contact your reseller, dealer or service
provider.
TOSHIBA Password Utility
Power and Power-Up
8-7