Compaq Presario R3000 - Notebook PC Software Manual page 24

6. When you are prompted to continue, press
7. To save your preferences and exit the Setup utility:
a. Press
b. Select Exit Saving Changes.
c. Then follow the instructions on the screen.
Changing a Power-On Password
To change a power-on password:
1. Open the Setup utility by pressing
<F10> to enter setup" prompt is displayed in the lower left
corner of the screen.
2. Select Security from the menu bar. (To select a menu, use
the arrow keys.)
3. Select the Power-On Password field.
4. Type the current password in the Enter Current Password
field, and then press
5. Type the new password in the Enter New Password field,
and then press
6. Type the new password in the Confirm New Password field,
and then press
7. When you are prompted to continue, press
8. To save your preferences and exit the Setup utility:
a. Press
b. Select Exit Saving Changes.
c. Then follow the instructions on the screen.
Software Guide
(or select Exit from the menu bar).
esc
enter.
enter.
enter.
(or select Exit from the menu bar).
esc
enter.
while the "Press
F10
enter.
Security
2–5